Wait

PCB Market uses cookies to give you the best shopping experience. By using PCB Market, you agree to the use of cookies, privacy policy and the site usage rules. The site displays different content for users from different countries. By continuing to use our site, you agree to provide true information about your location. This is necessary for the correct operation of the site and makes it as easy as possible.

Choose your country or region so the content and the products correspond to your location.

Electronic Products

Company Directory

Description

Description



No idea how to connect LoRa module to your Arduino pin headers? Well, you've come to the right place!

This adapter board is compatible with both the Ra-01 and Ra-02 modules and is a perfect match for the modules' pads. Even with basic solder skills, you can easily solder your Lora module and antenna onto this breakout board. Have fun!


Click here go to Lora Module page:

LoRa Ra-01 433MHz Long Range Wireless Transceiver - SX1278 
LoRa Ra-02 433MHz Long Range Wireless Transceiver - SX1278 


Package List:


1x breakout board for LoRa module

2x 1*7pin 2.54mm

Description

Product Description:

1. Mini Solderless Breadboard
2. 1 Terminal Strip
3. Tie-point 170
4. ABS plastic material
5. Completely reusable
6. Coloured coordinates for easy component placement
7. Phosphor bronze nickel plated spring clips
8. Accepts a variety of wire sizes (29-20 AWG)
9. Dimensions: 45x34.5x8.5mm
10.Color(Random): red,,yellow, green, blue, black, white

Description

Introduction:

A usefull box for storring verysmall parts like SMT components, ICs, screws, nuts, washers and other things. Easy to label, easy to open and easy to combine with our other SMD Boxes to have a whole storage panel.

Features:

  • The best way to store very small parts
  • Easy to label and easy to open
  • Can be linked with other SMD boxes from the same and different size
  • low price
     

Details:

  • Size Outside: 32 x 26.5 x  21.5 mm
  • Storage Size: 18 x 21.5 x 18 mm
  • Available Colors: Green, Blue, Pink, White, Yellow
     

Package Content:

Quantity Content 1 SMD Box XS (1x1) in the choosen color

 

Links & Downloads:

(none)

Description

Description

A must-have for Engineers, DIY’ers, and Makers. 

These jumper wires are female-to-female and consist of one end with a 0.1” (2.54mm) female header and 0.1” female header on the other end. They’ll attach snugly to standard 0.1” pitches. 7.9” (200 mm) in length, they come 40 in a bundle with 4 strips of 10 wires each. You can peel the cables apart if you wish to use them separately or keep them attached for ease of connecting.


Description

Description

A must-have for Engineers, DIY’ers, and Makers. 

These jumper wires are male-to-female and consist of one end with a 0.1” (2.54mm) male header and 0.1” female header on the other end. They’ll attach snugly to standard 0.1” pitches. 7.9” (200 mm) in length, they come 40 in a bundle with 4 strips of 10 wires each. You can peel the cables apart if you wish to use them separately or keep them attached for ease of connecting.


Description

Description

These jumper wires are male-to-female and consist of one end with a 0.1” (2.54mm) male header and 0.1” female header on the other end. They’ll attach snugly to standard 0.1” pitches. 3.9” (100 mm) in length, they come 40 in a bundle with 4 strips of 10 wires each. You can peel the cables apart if you wish to use them separately or keep them attached for ease of connecting.

Description

Description

These jumper wires are female-to-female and consist of one end with a 0.1” (2.54mm) female header and 0.1” female header on the other end. They’ll attach snugly to standard 0.1” pitches. 3.9” (100 mm) in length, they come 40 in a bundle with 4 strips of 10 wires each. You can peel the cables apart if you wish to use them separately or keep them attached for ease of connecting.

Description

Description

These jumper wires are male-to-male and consist of one end with a 0.1” (2.54mm) male header and 0.1” male header on the other end. They’ll attach snugly to standard 0.1” pitches. 3.9” (100 mm) in length, they come 40 in a bundle with 4 strips of 10 wires each. You can peel the cables apart if you wish to use them separately or keep them attached for ease of connecting. 

Description

Description

A must-have for Engineers, DIY’ers, and Makers.

These jumper wires are male-to-male and consist of one end with a 0.1” (2.54mm) male header and 0.1” male header on the other end. They’ll attach snugly to standard 0.1” pitches. 7.9” (200 mm) in length, they come 40 in a bundle with 4 strips of 10 wires each. You can peel the cables apart if you wish to use them separately or keep them attached for ease of connecting.

Description

Features:

  • Consumes less than 500nA in battery-backup mode with oscillator running
  • Automatic power-fail detection
  • 56-Byte, battery-backed, general-purpose RAM
  • Backup by AT24C32 32Kbit
  • I2C Serial Interface


Description:

This little, RTC (real time clock), will keep track of time even if reprogrammed or if power is lost. Use it in projects for data logging, clock-building, time stamping, timers, alarms, etc.


Since an Arduino microcontroller’s time keeping ability (millis()), is very limited in capability—i.e. can only keep track of time since its last power-up—it’s useful to have a separate RTC chip to keep a consistent count.


This module will keep track of time by seconds, minutes, hours, days, months, and year. You can program it to run either by 24-hour or 12-hour formats with AM/PM. It even accounts for months with less than 31 days and leap-years.


While the battery is not included (we recommend a coin cell battery), from this tiny RTC’s low power consumption you can expect it to run 5 years or more. If there is a power failure, the built-in power-sense circuit will automatically detect and switch to backup supply, preventing an interruption in time-keeping. It works best with 5V power.



    Package Content:

    1x RTC I2C real time clock module 24C32 storage DS1307


    Datasheet:

    DE4205-sample.zip
    AT24C32.pdf
    DS1307.pdf

    Description

    Description
    WS2812B is a 5050 RBG LED with integrated driver chip. By the integrated driver chip, it can achieve 1024 points of cascading (refresh rate at 30fps), and every pixel is individually addressable. Every pixel of 256 brightness display and 16777216 color variance. Only the 4th pin of the WS2812B, the integrated driver circuit and LEDs share the same 5V power, and 2 pins for signal transmission. Because of the ingenious design, the circuit design for this LED become very simple. 

    Manufacturer Requirements for Baking
    Please keep it in a condition of 65 ~ 70 degrees at least 4 hours before production. After finish preheating, put it into production within 2 hours.

    Specifications
    - Model: 5050RGB WS2812B
    - Package: SMD 5050 PLCC, 5mm, 4 SMD leads
    - Input Voltage: 3.5V - 5V DC
    - Wave Length (NM): R-620nm, G-525nm, B-460nm
    - Power: 0.24W/PCs
    - Signal: NZR, 800kbps WS2811 chip built in
    - Data Output: Build in signal reshaping to DOUT for cascading to the next chip
    - Precision: 8 bits/256 shades per color (24 bits per chip, 16M colors total)
    - View Angle: 120 degree
    - Life Span: no less than 50000hrs

    Documentations
    WS2812B Data sheet  Pay attention carefully the “Reflow Considerations
    OctoWS2811 LED Library - Driving hundreds to thousands of LEDs
    Adafruit NeoPixel Library - Based on Arduino platform
    Light weight library - For 8-Bit AVR micro controllers

    Description

    Description

    This is a low cost and easy to use mini water pump. It is very suitable for mini auto watering project for plant or fishing, also very good for building a mini submarine.

    It can work under DC 3 to 6V. The size is very small, and waterproof, just put it in the water and it will pump (of course it needs power). 

    By default we will add 1 meter water pipe with one water pump. You can choose longer pipe.

    We have two type of pumps, one is horizon, one is vertical. Check the dimension here:


    Vertical:



    Horizontal:



    Specification:

    • Operation Voltage: DC3- 6V
    • Current: 0.12- 0.20A
    • Power (W): 0.36- 1.2W
    • Max Water Head: 0.5 meter
    • Max Flow Rate: 100 (L/H)
    • Waterproof Level: IP68
    • Weight: 53.9g (with 1 meter pipe)
    • Pipe Inner Diameter: 6mm
    • Pipe Outer Diameter: 8mm


    Links:

    • How to build an auto watering plan kit


    Description

    Description

    This is a very normal and simple relay switch. MCU could not directly control home device, because MCU only operates at low power - 5V, but home device operates at high voltage - 110V- 220V. Relay is the best solution to control the high voltage device with MCU. Here for this module, there is one side to connect with MCU, and other side to connect high voltage device with the terminals. Just need to use MCU's Digital pin to send a high level to module, the high voltage terminals will turn on, otherwise it will turn off.

    Specifications

    • Turn on at high level, turn off at low level.
    • Operation Voltage: 5V
    • Max. power can be connected: 10A @250VAC, 15A @125VAC
    • Dimension: 17.2x43.1x16.4(h)mm



    Description

    Introduction:

    A usefull box for storring small parts like SMT and THT components, LEDs, ICs, screws, nuts, washers and other things. Easy to label, easy to open and easy to combine with our other SMD Boxes to have a whole storage panel.

    Features:

    • The best way to store small parts
    • Easy to label and easy to open
    • Can be linked with other SMD boxes from the same and different size
    • low price
       

    Details:

    • Size Outside: 32 x 76 x  21.5 mm
    • Storage Size: 21.5 x 70.5 x 18 mm
    • Available Colors: Green
       

    Package Content:

    Quantity Content 1 SMD Box S (3x1) in the choosen color

     

    Links & Downloads:

    (none)

    Description

    Specifications feature:

    • Charge module: Linear charging
    • Current: 1A, adjustable
    • Precision: 1.5%
    • Input voltage: 4.5V-5.5V
    • Full charge voltage: 4.2V
    • Input interface: mini USB
    • Work temperature: -10 to +85 degree
    • Inversed polarity protection: NO
    • Size: 25mm x 19mm x 10mm

    Datasheet:

    • TP4056Datasheet.pdf

    Product pictures:

    Description

    Description


    This is a small half-size breadboard, good for small projects. It has the standard double-strip along the center and two power rails on both sides. The rails will peel off to become even smaller should you need to stick it onto an Arduino protoshield. If you need it even smaller than this, you can also cut through the center where no circuits run and make two smaller boards. This breadboard also comes with hooks on the sides that will snap onto other breadboards to create a larger breadboard. 


    Dimensions

    • 2.2" x 3.4" (5.5 cm x 8.5 cm)
    • 9.7mm (0.38in) thick, including sticky foam on the bottom